Hotfix ALLPLAN 2025-0-1
Release notes (11/06/2024)
General
Thanks to several edits and corrected messages in the Quality Reporter, ALLPLAN now is even more stable.
The current SmartCatalog Editor is now available; you can call it up gain in the Services application.
Licensing
After closing ALLPLAN with 'Close' at the top right, the license is released again.
After a crash, the license is now renewed and reused.
MSI Setup
You can now also choose to deactivate the installation of the SmartCatalog.
The automated connections are installed correctly again.
Plug-ins
GIS Connector
When ALLPLAN is started, the GIS Connector is no longer started automatically.
Road
The 'road display' as isolines caused the program to crash; this has now been fixed.
No results were displayed in the volume report; this has now been fixed.
Teamwork
ALLPLAN Share
ALLPLAN Share projects can now be opened again by more than one user again.
The message boxes have been adjusted so that the texts are displayed in full again.
AutoCAD interface
The DWG export of smart symbols with large amounts of data now takes less time again.
IFC Interface
When exporting IFC 2x3, some structural columns were not transferred correctly; this has now been fixed.
Multi-layer slabs are now transferred correctly during IFC 4 export.
Recesses and openings in multi-layer slabs are now exported correctly.
In certain cases, the IFC export to IFC 4.3 caused the program to crash; this has now been fixed.
XRefs
After updating all XRefs, they were no longer displayed; this has now been fixed.
User interface
Attributes with min/max values in combination with a unit could not be changed in the information palette; this has now been fixed.
Elements on reference drawing files are now taken into account again in the 'section display' in the animation window.
When inserting objects from the wizards, a prompt now appears again if resources are not available.
When setting multiple entries for the 'Object' filter in the information palette, nothing was displayed; this has now been fixed.
The display of the progress bar has been improved in several areas.
In the information palette, the input values in selection fields with units were sometimes reset to zero in edit mode; this has now been fixed.
Clicking and holding the right or middle mouse button sometimes led to incorrect functionalities; this has now been fixed.
Basics
Invisible elements were also taken into account for the point snap; this has now been fixed.
Layout Editor
When exporting large plans to PDF, text underlines sometimes shifted; this has now been fixed.
Projects
Changing the 'Offset coordinates' via the 'Project settings' function now works.
PythonParts
Several improvements have been made to the PythonParts for 'Automated reinforcement'.
In the Python API, an error in the output of the index number for exploded polygonal bar placements has been fixed.
Views and Sections
Modifying non-associative free-projection views has been accelerated.
Structural framing
ALLPLAN now uses the correct anchor point when axes are added several times in a free grid.
Creating weld seams with the 'Connection toolbox' and changing them using handles works correctly again.
For connections created with 'Connection Toolbox', additional objects were displayed in the object palette; this has now been fixed.
In certain cases, structural struts were not created; this has now been fixed.
Architecture
Unfinished structure
With the new OpeningParts, the addition of further attributes in the 'Attributes' tab now works correctly.
When modifying slabs, the 'Change properties of selected object' check box has been disabled in the properties palette, as there is no longer a separate dialog box for the parameters.
When openings are modified, buttons with no functionality are no longer displayed in the properties palette.
When creating OpeningParts, the transfer of a polygon for the glass cutout has been improved.
When changing the opening height, the contained OpeningPart is now adjusted correctly.
The loading of favorites for multilayer slabs has been improved.
Splitting of multilayer slabs has been improved.
Connecting multi-layer components layer by layer with 'component to component' now also works in special cases.
You can now change the display areas of slabs in drawing files in edit mode.
The 'Zoom to selected objects' tool in the properties palette now also works with slabs.
The attributes have now also been saved in the OpeningParts favorites.
After moving the door opening, clicking on the door handle caused the program to crash; this has now been fixed.
To be able to move individual layers of a slab several times, the selected layer now remains active after moving.
Regardless of the order of selection, walls are now always chamfered correctly.
Stair
The entries for 'Hatching' and 'Pattern' could not be changed for the section display; this has now been fixed.
In certain cases, the stair carriage parts were not output in the report; this has now been fixed.
Engineering
The quality of ALLPLAN has been further improved by rectifying incoming crash reports and traceable messages from the ALLPLAN Quality Manager.
When using the layer filter in views or sections, multiple copies of reinforcement labels could show up; this has now been fixed.
The ALLPLAN Quality Manager has been improved and now also outputs elements with an incorrect drawing file number.
Bar reinforcement
With the function 'Place reinforcing bar along surface', selecting the reinforcement in the isometric view now works in the same way as in the floor plan; the complete placement is always selected.
During IFC export, all bending pins on hooks are now also displayed round instead of square in the IFC file.
For the aSa export, the number of permitted characters for the 'Release Description' attribute has been reduced to 30 again in order to avoid problems with data exchange.
The creation of linear placements with 'Lay round steel along surface' has been improved.
The reinforcement created with 'Place reinforcing bar along surface' is now better combined.
In certain cases, the polygonal placement of a bar of another polygonal placement led to a program crash; this has now been fixed.
In certain cases, the total weight for aSa export was incorrect; this has now been fixed.
The algorithm for calculating the axes of the reinforcing bars has been improved in the 'Place reinforcing bar along surface' function.
Sleeves
The ALLPLAN Quality Manager has been improved and now also recognizes joints that have lost their connection to the bar.
ALLPLAN Civil
The 'ALLPLAN Civil' plugin has been updated. Details